Installation options for units and extra devices
If it is necessary to mount the equipment on a wall, assess the wall ability to hold it. It’s not recommended to mount any heavy equipment on drywall or multiply walls.
Mounting of units on the wall
Before wall mounting the unit, it is recommended to connect it to source water, drain, and extra equipment.
The flexible tubes used for each connection point should have length reserves to avoid straining the tubes when putting the unit on the wall.
The flexible tubes used for each connection point should have length reserves to avoid straining the tubes when putting the unit on the wall.
Preparation for mounting.
Drill 2 holes in the wall (ø6-8 mm, depending on the diameter of the dowel) at the distance which depends on the equipment type:
Desalination modules
– 300 mm;
Additional purification modules with 2 cartridges
– 150 mm;
Additional purification modules with 2 cartridges
– 72 mm;
Insert the dowels into the holes, screw in self-tapping screws, leaving 3-5 mm distance to the wall.
Unit mounting.
Mount the unit on the wall using the ears on the housing back panel and self-tapping screws.
Drill 2 holes in the wall (ø6-8 mm, depending on the diameter of the dowel) at the distance which depends on the equipment type:
Desalination modules
– 300 mm;
Additional purification modules with 2 cartridges
– 150 mm;
Additional purification modules with 2 cartridges
– 72 mm;
Insert the dowels into the holes, screw in self-tapping screws, leaving 3-5 mm distance to the wall.
Unit mounting.
Mount the unit on the wall using the ears on the housing back panel and self-tapping screws.
Wall mounting of the storage systems
Wall mounting of storage systems is performed with a special bracket.
Preparation for mounting.
Drill 2 holes in the wall (ø6-8 mm, depending on the diameter of the dowel) horizontally spaced at 300 mm. Insert the dowels into the holes, screw in self-tapping screws, leaving 3-5 mm distance to the wall.
Tank mounting.
Place the tank on the bracket.
On table/floor mounting
When placing the equipment on the tables or on the floor, make sure that enough free space is available to place the equipment and to allow easy access for maintenance.