Filtrate withdrawal
The filtrate is supplied to the consumer automatically when the pressure in the filtrate line drops (by manually opening the valve on the distribution device or by opening the shut-off device in the equipment that consumes the filtrate, for example, in an analyzer).
If the filtrate line is shut off, the unit will stop distributing it. No additional user action is required.
Manual withdrawal of filtrate from the unit.
Open the valve on the filtrate line from the unit, take out the required volume of filtrate, close the valve.
Withdrawal by WD1 distributor.
Open the valve on the distributor, take out the required volume of the filtrate, close the valve.
Withdrawal by WD2 distributor.
Press the button on the handle of the dispenser. Take out the required volume of the filtrate, press the button. The distributor will start if only the electrical resistance of the filtrate is sufficient (green LED on the handle is on).